The Beer Recipator


The BreweryHomeSpreadsheetRecipesDiscussion

Post Reply Index Next Thread

Mushroom Corks
Posted by Keith Dallmer - Mon 12/28/98 15:58 - 1 of 2

I'm Looking for a source for mushroom corks and the corking tool. I'm making some Sparkling Meads and Lambics and would like to use corks rather than bottle caps. Beside, Lambics and Meads seem like they belong in champagne Bottles.

Any Help would be great!

Post Reply Index Next Thread

Re: Brewer stone
Posted by Randal Boyd - Mon 11/1/99 5:28 - 2 of 2, Reply to 1

Hello jean-roger,
Forget gimmicks like brewerstone, wort can be easily aerated with a simple gadget you can make yourself. Take a small length of copper tubing say 4"-5". 3/8 diameter will usually fit in most racking hose material. Insert it into your racking tube and drill two small holes in the copper just below the edge of the racking tube, one on each side of the copper tube. Insert the length of copper tube into a drilled rubber stopper of correct size to fit your carboy or other fermentation vessal, carefull not to cover the holes in the copper tube. Insert this device into your carboy and siphon your cooled wort into the carboy. Make sure there is enough distance between kettle and carboy so that gravity flow is strong. As the wort passes through
the copper tube air will be sucked in, aerating the wort as it goes.
Viola', aeration. I've been doing it for years, with excellent results. Cheers, Randy